Gary's escape

Yes this is a pretty old (from 1997) puzzle (which makes it highly collectible!!) designed by Gary Foshee and composed of a bottle, a metal rod and a marble to be freed.
 

Everything what you need is provided with the puzzle. You just have to take care because, being made with glass, it's fragile.

It's by no mean a difficult puzzle, pretty straight forward, but the ideas are clever. Even if you're not a seasoned puzzler, you immediately know what you have to do, how you will do it and what you expect the result to be. But still you will have pleasure to solve it.

In the solution booklet Gary says to unscrew the bottle to reassemble all the things inside. But if you want a pretty difficult challenge you can try to reassemble it without unscrewing the bottle.

What is your favourite bottle puzzle?

To conclude: this is a nice puzzle and perfect for an exchanged puzzle

8 star puzzle: the comparision between the prototype and the finished product

This nice-looking puzzle is a design from the Belgium designer Robrecht Louage. I have already reviewed some of his previous puzzles, checked it out!

You may remember the 4 steps puzzle, this is in the same concept but with 4 more steps.

The goal: you put the ball in the "in" hole and you need to free the ball, going through many traps.
Actually there are 8 steps, some of them are clearly visible and some of them are hidden either by black marks or hidden ways.

The first step is easy to go through: just a little bit of dexterity. Same thing for 2nd step but this time it's hidden. If you look well, 2 steps are identical and can be found in Roger D puzzles.

None of the steps can be considered as new principles, thus you will not have any novelty with this puzzle. However, the steps are implemented all the way on your "puzzle journey" and so there is not like "breaks" between them, they are a continuation of each other.

The difficult thing is the maze because even if there are some holes on the back of the puzzles, well you cannot see what you're really doing. You can only try to guess and believe me you should not make big moves, because the different ways are close to each other, with dead-ends and so on: so here it's dexterity in the dark.
Of course, you can unscrew the puzzle and see the maze if you gave up, and then try to navigate again in the maze.

Like usually with puzzles, there is first the prototype and after the finished product. I put below on the left the picture of the prototype and on the right the picture of the finished product, so that you can see the changes.

The front of the puzzle (ok I know the 2 puzzles are not orientated in the same way....my mistake)
For the prototype the plastic is absolutely transparent and a little bit opaque for the finished puzzle, but both have black marks.
I would have prefered that the finished product have a transparent plastic with opaque (and not black) marks, but opaque enough to hide the traps.
The black marks are positioned on the same traps.

The entry of the maze
Nothing different

The back of the puzzle
Again, sorry for the orientation of the puzzle, but I know my readers are clever guys, so you will notice no change, except the name of the puzzle with 2 stars, to make the product totally finished

The inside of the maze
Hummm, no spoiler. But the maze is globally the same but with some small changes, which make the maze of the finished product a bit more difficult, in my opinion.


Solvable and not solvable?
The prototype cannot totally be solved whereas the finished can be, that's normal right ;-)
But this is one of the last steps, so your puzzling experience will not be altered by this small faults. And a prototype is always a high collectible puzzle, isn't it?

To conclude: a very nice puzzle, not difficult but still very enjoyable. Perhaps next puzzle will be the "12 steps puzzle", who knows...

 

So don't wait too much and buy the puzzle!

If you're lost in the puzzle, look at the solution!!

3M puzzle

Time to review a packing puzzle by the famous Iwahiro. This puzzle is easy to understand: you need to put all the 3 pieces (with an M shape, hence the name of the puzzle) inside the box. The box and the pieces are made from MDF.

Ok then simple goal, simple solution? Not at all!

If you've already played with any Iwahiro's puzzles like the Jam puzzles or the ODD puzzle, you know that all his puzzles look simple, but actually their solution include either rotations or unusual positions.

As you can see below, the pieces cannot be packed in an usual way, the goal is to pack them so that you can close the box of course!

I play some time with it trying to put them in different ways, and you will notice soon that these pieces interact with each other: just putting one on a vertical plan, the other flat (for example) does not work.

You need to think "outside the box" to put everything inside the box, paradoxical, isn't it? :-)

Once you have figured out the solution, a little dexterity (a very little I would even say) is required.

This puzzle has a satisfaying solution and it will puzzle you for some time I am sure. Iwahiro also designed the 4M puzzle, same goal, but perhaps not the same solution (actually I do not know as I have not yet tried the 4M puzzle, but I would expect a different solution, or at least a slight difference).

If you want an unusual packing puzzle, this is definitely one you should try to get!

Is there anything inside?.... ;-)

Do you need some light(er)?

Yes yes it's a lighter...but you cannot burn anything with it, or perhaps your brain :-)

Actually it's a puzzle designed and crafted by Roger D, the famous unknown designer (don't you think-like me-that it's a real pitty that nobody knows him?...), all in metal (the flame is in brass, the core is the metal used for many of his puzzles).

The puzzle is not big, but the size is still satisfaying and the weight is not light (you get the pun?)

Looks impressive, doesn't it?

Anyway, let's continue! When you get a Roger D puzzle, actually you have 2 puzzles: the first puzzle is to understand the goal (it's easy to guess it for R2D2 for example), the second puzzle is to solve your metal puzzle.

For this puzzle, I cannot put a picture of the puzzle in the solved state because it would show you the goal of it.

So what would be the goal? Pushing the flame inside the core? Pulling the flame out of the core? Turning the flame? Or perhaps the goal has nothing to do with the flame?...But once you have solved the puzzle, the goal is obvious of course!

Now the solving experience? Humm let's say it's a difficult puzzle. You do not know the goal, you cannot see the internals...So yes, it's difficult: you can experience some pain to solve it! No external tools are required to solve it, by the way.

You can only hear some things ratling inside: but it's difficult to hear if it's only one thing or many things, where they are, and so on.

The cleverness of this puzzle (despite it's natural beauty) is that the mechanism is not super complex: it's rather simple and definitely very well crafted with good precision.

To conclude: a very nice puzzle to play with. It's also very original. I like the design and the solution (I think I found the "official" solution even if no solution are usually published for these puzzles).

Rightangular Jam

In a previous review I talked about rectangular Jam from Iwahiro, time to speak quikly about another one: rightangular Jam.
The original material used is MDF

The principle is still the same: free the colorful piece out of the tray. This time with rightangular triangles.

The puzzles includes a lot of rotations and is very tricky and hard to solve. Much harder than rectangular Jam.
As far as I know there are no other challenges (contrary to rectangular Jam). If I am wrong, just let me know.But perhaps it's possible to invent some?

Again, the precision if perfect, the design is handsome. I really wonder how the designer came to this idea. How is it posible to imagine so many movements?...

So the fit is so precise that sometimes it seems impossible to move or rotate a piece. Just make small and slow moves and it will work!

As you may assume, I put the pieces as they appear at the beginning of the solving process :-)

To conclude a beautiful and interesting puzzle to play with!

Still looking for the some other Jam's...

Bottle coke #9

This bottle is quite unusual because it is in aluminium and not in glass, and thus you cannot see what you're doing, which makes things even more difficult!

By the way, if it were transparent, it would have been too easy :-)

There is a marble inside the bottle, and again the goal is to free it. This time, you don't have to worry about the rigidity of the bottle because this one cannot break, at least from my experience.

As if the fact of not having a glass bottle was not enough, there is a washer that provides you from seeing what the mecanism is, this makes the puzzle more difficult to solve.

You can notice that a hole is pierced in the place of the bear's nose, so maybe this can be useful...
But anyway the hole is pierced in a "designed way". I mean if it were just in the red it would not have looked really nice, whereas here it's almost normal to have a hole for the nose of the bear.

Wil Strijbos adds 2 glowing sticks along with the puzzle. They can be used to see what is inside of the bottle. Try to make good use of them because they don't last forever. But, keep them even after they don't produce light any longer. Usually you should not throw away anything with Strijbos' puzzles.

The fashioned way to find treasures inside your nose :-)

The bottle is very very tricky. The mechanism is simple but cool. Only Strijbos can design such a devilish mechanism. And when you've solved it, you will see how simple things can be so difficult sometimes. But don't think, however, that it's too simple; the mechanism is very well thought.

No shaking, banging is allowed (nor useful) and use of external tool is not useful. Remember that external tools are everyting that do not come along with the puzzle...

I advise you to buy it if Wil make it again, I am sure that it will fit well in your bottle puzzles collection or/and un your Strijbos' puzzle collection.

Push box 2

After the Push box that I reviewed some time ago, here is the next one: Push box 2 !

Same designer (Simon Nightingale), same kind of material (corian), pretty same dimensions, but not same mechanism (luckily!).

Again you do not see what you're doing and unfortunately you will not be able to see the internals. The good point is that the drawer cannot fall on the floor :-)

Now, what about the mechanism? Well, nothing new...So, nobody will have difficulties to solve it quickly. It took me around 10 seconds.

Nightingale is famous for his puzzles with clever and interesting mechanism, I wish he invented a new mechanism and did not simply took an already existing kind of mechanism, even if it was an exchanged puzzle.

Anyway, whether you like corian or just collect Nightingale's puzzles, I recommend it. If you want a bit of challenge, that's not the puzzle for you!

Confetto box 2

I have already reviewed the first Confetto box, so now it's time for this second Confetto box, which was designed by Iwahara for the 2014 X-mas presents.

As with Karakuri, you always know that the puzzles are well crafted and put in simple but nice box.

If you have already played with Confetto box 1 (I strongly advise so that you better know the principle of these confetto puzzles), you notice that this puzzle is a bit smaller (why??) but still have nice wooden panels.

The goal is to find a secret compartment (there is only one contrary to Confetto box 1) by moving the panels. The moves are a bit tricky but you will know pretty quickly what you have to do, because you cannot do anything if the previous steps are not done.
Perhaps a Confetto box 3 would have some kind of "dead ends". I mean you can move many panels and moving one panel may lead you to a dead end. That would be a bit more challenging. Because again, like Confetto box 1, you have to do the previous steps to do the next steps and there is only one way to do that.
So Confetto boxes remain pretty straight-forward puzzles.

However, this puzzle is very good and you will have fun whether you like trick opening boxes or Karakuri's puzzles.

I still prefer Confetto box 1 because I prefer the color of wood of Confetto box 1, because it's a bigger puzzle, because there are more secret compartments and finally because the moves are much easier to make with it (it slides smoother, but it's also due to the solving process of Confetto box 2).

Which one do you prefer? The 1st Confetto box or the second one? Why?

Enigma orbs

They need your help!

There is a new crowdfunding campaign on kickstarter to create a new kind of puzzles. These puzzles are in concrete, yes you read well! The goal is to assemble the pieces (that have magnets inside) to create an orb.

They look really nice with the inclusion of colored pieces of glass. Different size will be produced with many more colors (stains and glasses). The smaller orb can fit completely in the medium one, and the medium one can also fit in the bigger one.

I took the pictures from the website because I cannot have any since they are not yet released.

Which combo do you like?

If you want to own one of them, then help them HERE  :-)

I reall hope the guys will reach their goal and raise the money to supply us with these wonderful puzzles!!!

Rectangular Jam

An unusual puzzle design by the well known Iwahiro, which consists of sliding pieces flat to free the green piece.

The movements used are not only linear movements and can include rotations, which makes the puzzle pretty difficult.

Even if you do not need a lot of steps to solve the puzzle, as the pieces are precisely cut, you may think that it's impossible. But when you go slow and do not use any force, you notice that you can make some moves which appeared as impossible at the beginning.

As you understand, you're not allowed to lift some pieces and everything has to remain flat!

There were additional challenges, but if you solve this one and understand the principle, then the other challenges are easy.

I like a lot the design of this puzzle. Which ones from the Jam series do you prefer?

Cast nutcase

Cast Nutcase belongs to the cast series of Hanayama's puzzles and is ranked as 6/6.

The puzzle is a trick bolt with a nut inside. It is composed of 2 big nuts with the words "nut" and "case" written on each. That's where the name of the puzzle comes from.

The first goal is to open the bolt to take the nut out of it.

Another challenge is to change the name of the puzzle to make it become "case nut" with the word "case" written on the nut above the other nut.

Challenge #2

Again, I don't really understand why it is ranked so high because the puzzle is not difficult to solve...It can take some time but not a lot!

One "big" problem with this puzzle is that you should roll along the nut on the thread quite carefuly because sometimes it jams a bit. This mainly happens when you're rolling the nuts and at the same time pulling the puzzle from each side to open the bolt (I am not really spoiling because you notice what you have do to quickly!)

Don't force, take your time, make small moves and everything will be ok :-)

Did you know about challenge #2 or you thought the only challenge was to open the puzzle?

You can buy Cast Nucase on Puzzle Master Webshop and find there the solution as well!

(Im)possible cards

I like impossible objects, like these cards. The funny thing is we call them "impossible" but the thing is they have been made, so it was possible to make them. And probably the impossible thing is to make them back to their initial state (even if I don't think you would try that!) without damaging them.

I love curves. The result is impressive! Don't you think so?

So it would be better to call them "impossible looking items": it seems impossible that they have been made because either you cannot fill in some shapes in a bottle or, like with these cards, it seems that it's not really possible to obtain these cuts without glue.

Symmetrical and precise: so nice !!!

So I tell you right now: no glue, no scotch tape have been used by the designer! And it's wonderfully made! It's crazy: how can he make such natural curves and such natural shapes??? "The habit" he told me :-)
But even with a pair of scissors I have difficulties to cut a round in a thin sheet of paper...cutting cards is much more complicated.

The designer does not only make these beautiful impossible card but also impossible bottles and impossible folded bills. He makes a very very good job!!


Ralf has also a website where you can contact him if you would like to purchase some impossible cards or bottles.
Do not hesitate to drop him an email, he is a nice guy!

Do you prefer impossible cards or impossible bottles? Or perhaps both at the same time: an impossible card in an impossible bottle :-)

No, I will not try to unfold them :-)

Danlock A

What a nice trick lock made by Dan Feldman!
Especially when you know that it was made using an existing lock, which is far more impressive than creating a puzzle from scratch, because you have to modify with a lot of precision in such a way that the puzzle can still be opened, but with more moves!

The goal of this puzzle is to open the lock, not difficult to guess :-)

The original thing with this puzzle is that the lock is provided with a real key that is blocked and with another key broken (2 pieces).

How to use this broken key, you may wonder? Well just try things and don't be afraid: everything has been well thought. So you cannot loose anything nor damage the puzzle trying things. Not force however and not bangging!

To open the lock you cannot use the complete key, so you have to use your broken key!
To reassemble the puzzle you will not just do the same steps in another order, you will have to do other things.
Thus, the puzzle is not only opening it but also closing it, and I am sure you will have a lot of fun with it.

To conclude: a very nice puzzle, not difficult but with many tricks!

Do you prefer the A model or the B model?
If you had to choose 3 trick locks (from any designers) to bring on an island, what would they be? ;-)

Solution: not HERE (joke!)

Crazy magnets

Magnet mania (the real name of this puzzle) was designed by Chris Morgan and is composed of a tray with 9 holes in which you have to put the 9 balls, of course!

Easy you think? Not at all, this is much trickier than what you may have thought !!
Because when you try to put a ball, which is actually a very powerful magnet (take care of your fingers!) in a hole and then put another ball, they fastly stick with each other...which may pinch your fingers but also mix the different kind of balls. They are not all the same even if they look like the same...

You will become crazy that each attemps fail or if you succeed to put some balls, then the next attempt ruins what you have done before...

Actually there is a trick that I did not discover not use to solve this puzzle. But if you discover it, then it will make your solving process easier (does not mean "easy" remember^^). You need patience and a little bit of dexterity: do not shake nor make any moves when trying to put a ball, otherwise the other balls could not like that :-)

The good thing when you solve this puzzle is that the box prevent you (once closed) the balls from leaving their holes. Thus you can keep the puzzle is the solved position, which is very nice I feel.

To conclude: a nicely thought puzzle which will puzzle and frustrate you for hours!

The great (great) escape

This puzzle was designed by Simon Nightingale and was made from corian (now I know what is this kind of material). Many different versions exist: one was the exchanged puzzle in 2009 and another one won honourable mention at the Design competition in 2009.

The puzzle feels pretty heavy in your hands and the quality os perfect. Moreover you can solve it again and again. But if you want to be faster, you can put only 1 ball instead of all the 4.

The goal is (seem to be) easy: you need to put the 4 small balls in the holes of the puzzles and them try to get them out of the puzzle.

When you look at the picture above, you may think that it's easy, but perhaps you don't know how tricky Simon is :-)
It's just that here you cannot see what is inside and prevent you from solving this puzzle and it's dark inside. Everything is so well hidden that the puzzle does not give you any clue.

You should play with it on a carpet (for example) but not outside of the street. Because you may manage to free one ball by chance, and it would be a pitty to lose it.

To conclude, a good puzzle to play with and to solve again and again !!

Ice(solute) difficult puzzle

Sometimes you want to try things, you want to experiment some kind of puzzles...
Metal puzzles, wooden puzzle, etc. that's common. Ruber puzzles a bit less. But ice puzzles...never seen any in any blog. So I thought I needed to try that first!

So let's begin with the pieces: there are 9 pieces composed of 4 cubes.

With the pieces, it's obvious that you will not be able to build a cube, but a rectangle, and mostly on only 2 levels:

Sorry for the quality of the picture, but it's not easy at all to take a picture of an ice puzzle ;-)

So as you can assume, there are a lot of issues with this puzzle, which makes the solving process all the more challenging:

• The pieces are not regular (because you won't likely put exactly the same quantity of water for each pieces...), thus the puzzle is not flat, and the pieces don't fit well with each other. 
•  You have a natural timer: the pace of the melting of the ice pieces and believe me they melt fast when you manipulate them.
• The ice pieces slip a lot on the plate and the puzzle falls a lot, but you need to hurry!
• And finally your fingers are frozen :-)

That was a good experience/experiment and a new concept I feel, not usual. I like it, but perhaps if you have some plastic cubes it's better because you can try many combinations before.

I wonder how many solutions there are for this puzzle...Any idea?

Will you try also to play with ice puzzles?

But anyway, if you don't try to solve this puzzle you can still use the ice for some cocktails: puzzler's cocktails of course ! :-)

When it's hot, it's fire puzzle!

This puzzle is the first of the series of "element" puzzles (fire, water, earth, air) designed by Steve Miller, who drives also an explosives company.

This puzzle comes with a beautiful box and some clues that need to be solved first.
Does it remind you something? the box...the clues....

Opened !!! The box, I mean... :-)

It should be, either you have the Isis puzzles or have read my review about them.

The clues are very hard. I must admit that it annoyed me a lot, I did not have fun with them. You can spend hours of frustration on solving the clues. But this can be also seen as a puzzle, even if I prefer solving mechanical puzzles rather than cryptic puzzles...

I regret that this principle of clues is a mere copy of the Isis puzzles, that is not really new nor original.
Perhaps it can be explained (in part) because the designer of this puzzle designed also some puzzles for SonicGame company (the Isis puzzles), thus he took the same ideas.

Anyway, the design of the puzzles is very good and the quality superb!
It is heavy, so take care!
The thing that I like less is the plastic feet of the puzzle that can slip away from the base because they are just glued...

Some people solved it without the clues, some needed the clues. I think the clues are useful, but you have to interpret them, and this is not easy. You need to think twice, three times or more about the meaning of each word.

The puzzle does not give much clue, so you rotate the cone and...you're stucked...Pretty strange...
It seems that there is kind of maze inside...

After understanding a bit more the clues, then you know how to navigate and you can repeatedly solve the puzzle and have more fun than frustration :-)

Remember: there are more than just opening the puzzle...I cannot tell too much because it would spoil you the surprise.

To conclude, this is a good puzzle, especially if you're a metal lover. The price is not cheap but you will have hours of puzzling!
If enough puzzles are sold, the next puzzle in the pyro puzzles series will be produced.
I really hope Steve will do his best to release the next puzzle(s)!

HERE you can buy yours. Enjoy!

Ready to read book puzzles???

You like puzzles? Yes, I am sure about that!!
You like books also?? Well, then you're ready for puzzling books !!! :-)

These books are laser-cutted by Péter Gal and are based on many kind of puzzles, mostly packing puzzles (goal is to fit all the pieces in a tray) which are "pretty" difficult, you're warned!
Many of them are based on ideas from S.Coffin for example, so known designers and thus nice puzzles!

In each puzzle you find the pieces on the right side and on the left side there is a sheet of paper (in one side: the goal, in the other: the solution)

I fond these puzzles really nice and enjoyable and also practical: you can easily store them and when aligned the shade of colors is nice :-)

As the pieces are laser-cuted, the fit is precise and excellent, thus it can be tricky to pack some pieces...

I put below some nice book puzzles:

This one is very very difficult...

For some puzzles you are given pieces and 2 different (or more) shapes to fill in with these pieces. The shapes have to be filled in completely, so no big space between pieces!
These kind of puzzles are very handsome:

Some puzzles have the same pieces but not the same tray to be filled in, thus you need to orientate the pieces in different way.
That's really funny to see that for the same number of pieces you can fill a smaller tray...You will have to think twice before putting the pieces ;-)

Do you have some? If so, which are your favourite ones?

If you need to contact Peter, let me know unless perhaps he puts his email address in the comments, who knows. 

In any case if you cant to see more of his puzzles, you can have a look HERE.

Enjoy, but read also real book :-)