I sell the below puzzles.
The list will be updated from time to time so don't forget to have a look ;-)
All are in perfect condition and work perfectly.
Any issue regarding the mechanism / condition of the puzzle will be mentioned.
Shipping is tracked wherever you're are. You will need to sign the parcel to get it.
All the care is taken to be sure the puzzles will not get damaged during the delivery.
However I am not responsible in case your customs/delivery guys are not careful enough!!!
If you need that I write any specific information in the custom form, let me know prior to the shippment. Same thing as if you want to insure the parcel. Any additional costs (like a higher insurrance) will be paid by the buyer.
Payment is with paypal only
Solution upon request (if you buy the puzzle, of course).
€ = less than or equal to 250 euros
€€ = more than 250 euros but less than or equal to 500 euros
€€€ = more than 500 euros
If you're interested and/or have questions, please send me a message through the contact form.
If you're looking for any Karakuri puzzle boxes just let me know by sending a message.
Designed by Stewart Coffin
This is an original packing puzzle, far from being easy
Designed by Haym Hirsh and made by Brian Menold
A beautiful and very challenging packing puzzle! Hours of fun !! The holes will help you
Toster puzzle box
Designed and made by Dan Alterman
The goal is to toast the bred and claim your prize.
Original and fun puzzle. Several steps to solve it. It looks a real toaster!! Super limited edition!
Ship in a bottle
Designed by Goh Pit Khiam and made by Tom Lensch
A nice sliding puzzle. You have to free the pieces, turn them on the opposite side and make a ship that looks going to the other direction. Each piece have a drawing on each side. So obisouly you will have to turn the pieces to solve the puzzle. A lot of moves required.
Plexi on top and bottom.
You can put your fingers inside the puzzle which helps to move the pieces, so no dexterity involved! ;)
Designed by Volker Latussek. Made by Pelikan
A very tricky packing puzzle. You need to pack the pieces so that the top is flat (so the solution is not as shown as the picture on the left!). Way more difficult than what you think.
Stand by cube 4
Designed by Gregory Benedetti and made by Eric Fuller
Difficult and challenging puzzle.
Shipped assembled for more safety. Perfect condition.
A nice looking puzzle that hides a devilish mechanism.
Please note that the orientation of the magnet on the top of the box is faulty. I mean you cannot close completely the lid as the magnet is positionned on the wrong side.
However this does not provide to solve the puzzle. The magnet has nothing to do with the solution.
Brass baseball bat
Assemble the 6 pieces to make this beautiful sculpture.
It holds by itself. However I recommend to not put fragile objects close to it and to assemble/disassemble carefully and not on/close to fragile surfaces.
The puzzle is shipped disassembled.
A piece of art!!!
Designed by Ken Irvine
Trifecta was Ken's entry for the 2015 IPP design competition. It's a lot of fun, with two different goals: three copies of three different types of pieces assemble to form the given configuration, both with and without the optional three-cube bonus piece. There is a fair amount of confusing movement with disassembly, and reassembly is moderately difficult but a lot of fun
Two-tone Zero by Pelikan
Made by Pelikan and designed by Osanori Yamamoto. A nice and challenging puzzle
Diamond case made by Pluredo
The goal is to open the box
Ball of whacks
It's a magnetic toy. You can make several shapes. A small booklet is included with some challenges and mathematical thoughts.
Puzzle by Keith Winegar
The goal is to disasemble the pieces. The tool is just here to maintain the pieces and remove the screw and is not part of the solution.
Prototype of the Dorstorm puzzle
The Dorstorm puzzle was invented long time ago and made recently by Robrech Louage for the ipp exchange in San Diego (2018). This prototype is not fully functional in the way that it's easily solved (compared to the final version) and it's missing a round plate on both side of the puzzle. So this is more a collector item, especially if you have the final version. You can compare both version. Maybe that may help you understand how to solve the final version. And if you don't have the final version, you can still buy this prototype and make the additional piece to have a fully functional puzzle.
An interlocking ball puzzle made by Vinco. More difficult than it looks. Will be shipped assembled like on the picture on the left or disassembled like on the picture on the right (upon choice of the buyer)
Orb by Sonic Game
This is the extreme version of the orb!! Perfect condition.
Shipped with its original leather box and carton box. The puzzle has already been registered. The key has been removed. I still need to find it. Anyway it does not really matter if you don't participate (and I am sure you won't because it's too time consuming, too difficult and you have very little chance to make any progress haha) in the adventure. So if you're just a puzzle player/collector, you should be fine :)
Toothpick safe by Frank Chambers
Goals: open the box // solve the puzzle that is inside
A rare puzzle that you need to have!!
Tumblebug by Frank Chambers
See the goal in picture below. A nice and very challenging puzzle!
Confusing secret by Ton Delsing
A 29-year old trick bolt, highly collectible (only 5 ever made in the world !!!).
Goal is to release the washer
2 butter churn puzzles designed and crafted by Marcel Gillen
Difficult puzzles. Simple but super efficient mechanism. Some differences between these 2.
Goal is to extract the shaft. These are original puzzles and not the copies!!!
Cubbyx and Cubbox designed an crafted by Zdravko Zivkovic
Heavy wooden packing puzzles. The shapes of the pieces are unusual. Difficult puzzles. Both are different. The price is for each puzzle.
Sandfield jewel dovetail box
Unusual dovetail puzzle. I don't have the key, but who said it was needed?....or maybe?....
Drumsticks by Allen Rolfs
Not difficult at all and maybe it will be solved during the delivery. I would say it's more a collector item rather than a real "puzzling puzzle"
Matchbox made and designed by Frank Chambers
Difficult to solve if you don't have a twisted puzzling mind :-) Open the box
Definitely a puzzle to have!!
Ball trapped by Marcel Gillen
A very original puzzle designed and made by Marcel Gillen long time ago. Why original? Because made of 3 materials: wood (MDF probably), plastic, metal.
The goal is to free the ball. Of course it's doable because the ball was firstly put inside!
Perry McDaniel puzzle box
Super nicely puzzle. Very nicely made!
Zipper puzzle designed by Iwahiro
2 challenges: close one of the 2 color zippers completely // close all the zippers completely
Loop box designed and crafted by Kagen Sound
Nice woods. Superb quality. Clever solution. Definitely a puzzle you have to get!
This is an impossible puzzle designed and crafted by Mike Snyder. It's an old puzzle.
The nice thing is that you can play with the nut. The goal is to guess how it has been made.
A nice conversation item!
Big sphere by Vinco
Designed and crafted by Vinco, this puzzle is also nice to display
Difficult to assemble
Will be shipped assembled
Metal puzzles by Allen Rolfs
Lady bag, traveling salesman
The quality is not that good, but the puzzles are still playable. Hand-painted it seems.
The difficulty is not too high, but the puzzles are still challenging. The puzzles are shipped with their original box as seen in the below pictures.
Price: € each
Crafted by Mike Snyder
I advise not to take out the treads from the needle. The goal is to guess how it was made.
A nice conversation item.
The famous solitary chess puzzle but with several challenges
Designed by Ken Steven. The goal is to free the matches without unscrewing the screws and without any external tools.
Designed by Simon Nightingale, this puzzle is composed of a block of corian that you need to put inside its (heavy) wooden base. You need to put it completely flat!!
A fun puzzle. Difficulty is medium depending is you're experienced or totally new to puzzles.
A puzzle that you need to have!
Designed by Iwahiro and crafted by Brian Menold, the goal is to put the 4M shape pieces inside the box so that the lid can close the box flat.
The lid is somewhat not perfectly cut (proof of handmade work!). So there is a difference of "levelling".
However, this does not provide at all to solve the puzzle. It's just purely aesthetic. This is a very good puzzle, don't miss it!!
Old tangram puzzle
Seems to be made out of a kind of stone. In it's original box with original booklet. Does not contain the solutions. For the pure collectors!
Pillar puzzle by Kunio Saeki
Packing wooden puzzle from long time IPP. In original box. No solution included. Pretty difficult.
On the spot insanity
Exchanged puzzle. A well known one!
Impossible folding by Allen Rolfs
I will provide you a PDF version (so you pay for a PDF, not a hard copy).
Interesting and rare booklet that will teach you the secrets to make impossible foldings!!!
Puzzle crafted by Maurice Vigouroux
It seems to be the famous soma cube
The lotus box
Designed and made by Kagen Sound. It is part of a trilogy of 3 boxes.
No doubt that this puzzles will gain value in the years to come. Stickman and Kagen's puzzles are really an investment when you want to part with them! But you can also keep it in your collection!!
This one will probably be worth around 5000 euros/dollars in 2 years at auction, like usually.
The puzzle is in perfect condition, sold with its original box as the below picture (don't worry, the lid is provided haha!)
Designed, crafted and exchanged by Peter Gal.
For each challenge you have the solution. From easy to difficult you will have a lot of puzzling fun!
Shipping with its original (signed!!) box